Pumps/Inflation

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.

Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.

Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket

The longest and slimmest version in the DA pump series fills high-pressure road tires fast. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120 psi / 8 bar. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta with integrated dust cap - BARREL / THUMB LOCK: Aluminum - HANDLE: Plastic - CAPACITY: 120 psi / 8 bar - VOLUME PER STROKE: 66.9 cc (pull + push) - SIZE: 25.8 x 3.2 x 2.8 cm / 10.2” x 1.3” x 1.1” - WEIGHT: 118 g / 4.16 oz Added Features - Dual-action pumping head - Side-mount bracket

Like bringing your floor pump on the trail. High-volume barrel fills fat tires fast while fold-out foot pad and flexible hose make inflation a snap. - Head: Presta/ Schrader/ Dunlop Valves - Barrel: Butted Aluminum - Thumb Lock: Plastic - Handle: T-Type Plastic/Kraton - Capacity: 160 psi / 11 bar - Added Features: Fold-out Foot Pad - Flexible Hose - Centerline Mount Bracket - Size (L x W x H): 35 x 5.8 x 3 cm - 13.8" x 2.3" x 1.2' - Weight: 250g / 8.80 oz

The Roadie TT Twin Turbo is a full-metal, pocket-sized mini pump that transfers larger air volume from a bigger diameter outer chamber into a smaller diameter inner chamber to deliver more air at higher pressures to fill tires 50% faster and easier. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel / Thumb Lock / Handle: Aluminum - Capacity: 160psi / 11 bar - Volume Per Stroke: 41.4cc - Side mount bracket - Size: 19.5 x 3.3 x 2.35cm / 7.7" x 1.3" x 0.9" - Weight: 100g / 3.53oz

Topeak's Turbo Morph G is super portable so it can be carried on all your rides, yet still offers the pumping power of a good floor pump thanks to a padded T-handle, a long hose, a fold-out base to stand on, and a high-volume aluminum barrel with built-in gauge. A frame mount is included, too.

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

- Ball-inflating needle for footballs, basketballs and more

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

Replaces worn end on any pump hose. - Head Type: Schrader

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"

Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

Sunlite's Model D Floor Pump has a 16-inch tall steel barrel for easy inflation and a sturdy base. The easy-to-use thumblock head fits all of your Schrader valve tubes.

- Dual head mini road pump - Presta/Schrader compatible head - High pressure/high volume switch - Ergo fit T-handle - 120psi max

- Mini multisport pump perfect for taking along on the next adventure - Ball needle and inflator included - Presta/Schrader reversible head - 2-way pumping action - Twist lock valve connection - 80 psi max - Head Type: PV/SV

Sunlite's Model W Floor Pump has a 20-inch tall steel barrel for easy inflation. For easy transport and storage, the base features folding feet. The easy-to-use thumblock head fits all of your Schrader valve tubes.

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

- Mini road pump with intergrated gauge - Presta/Schrader compatible dual head - High pressure/High volume switch - Ergonomic T-handle - 120psi max

Sunlite's Air Surge Frame Pump uses an oversized aluminum barrel to get your tires up to 100 psi quickly. The T-handle is comfy and makes airing up a new tube quick. And, the dual head works on both Presta and Schrader valves. A frame mount is included, too.

Sunlite's Air Surge Frame Pump w/Gauge uses an oversized aluminum barrel to get your tires up to 120 psi quickly. And you'll know your pressure thanks to the built-in gauge. The T-handle is comfy and makes airing up a new tube quick. And, the dual head works on both Presta and Schrader valves. A frame mount is included, too.

- 21" high flow composite barrel floor pump - Schrader valve head with included Presta adapter - Type: Floor - Head Type: PV/SV - Max PSI: 120psi - Length: 21" - Barrel Material: Composite

- High-flow steel barrel - 160 PSI high-pressure pump - Sturdy base, ergonomic T handle, long hose - Thumblock head for Schrader valves with Presta-valve adapter

- 1-way mini pump with integrated 40mm - 160psi gauge - Smart head works with Schrader, Dunlop and Presta valves - Bracket included

- Telescoping hand pump with integrated 30mm, 160psi gauge - Smart head is compatible with Schrader and Presta valves - Plastic handle unfolds into a T-handle for ease of use while pumping - Bracket included

Use Sunlite's Air Surge 2-Stage Pocket Pump to inflate both road and mountain tires. It features a high pressure/high volume switch for quick pumping convenience. Flip it to the high volume setting and the telescoping aluminum barrel pumps your tire up quickly. Then, to top it off, switch to high pressure and dial it in. And, its dual-head design works with both Presta and Schrader valves.

- Foot-operated - Gauge - Thumb lock

• High-flow steel barrel • 160 PSI high pressure pump • Sturdy base and Ergonomic T- handle • Schrader valve w/ thumblock & presta adapter • EZ Read gauge

• Up to 120psi • Gauge • Lightweight

Sunlite's Air Surge Comp Lite Floor Pump features a high-flow aluminum barrel, an ergonomic rubber handle, an easy to read gauge and a sturdy base. It fits both Presta and Schrader valves.

- 22" high flow steel barreled floor pump - 2.5" EZ Read gauge - Schrader valve head with included Presta adapter - 160psi maximum - Type: Floor - Length: 22" - Barrel Material: Steel

- Black anodized alloy barreled floor pump with integrated analog gauge - Composite handle and wide base make for a stable pumping platform - Reversible head is compatible with Presta and Schrader valves - Includes ball inflation accessories - Max PSI: 160psi

- Alloy floor pump with steel anti-slip foot pad - 1-1/4" barrel diameter and 24" chamber height quickly inflates road and MTB tires - Includes plastic tips and sport needle accessories - Compatible with Schrader and Presta valves - Large easy to read 4" gauge - Max PSI: 160

- 22" high flow steel barrelled floor pump - Presta/Schrader auto select head - Ball needle and inflator adapters included - 2" EZ Read gauge - 160psi maximum

• Large gauge • 160 psi (11 bar) • Dual head fits Presta and Schrader valves

- Tall 26" floor pump requires less bending over and features a 2.5" easy to read gauge - Steel barrel and base with plastic gripped foot pad - Autohead fits Schrader or Presta valves

- No-loss shock pump with 2 stage air valve - Easy to read gauge - 360º hose rotation avoids binding - 400psi max pressure - Air bleed valve for fine tuning

Adapts Presta valve stems for use with standard Schrader pumps.

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

Replacement gasket for the SILCA HIRO Chuck

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap

Originally designed in the 1950s when the Bianchi-Pirelli team requested a pump that could fit under the rear seat of the Fiat team car, the Pista pump quickly became an icon of professional team cars and mechanic workstations at 6-Day track events around the world. The compact form of the pump, and the ability to lay completely flat, allow the pump to take up minimal space in a trunk, duffel bag, or larger tool kit, making it a true icon of the sport amongst the cycling cognoscenti. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product have continued. As we're now in our second century of making high-performance pumps, we're pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. - Durable, high-strength steel barrel - Compact ash wood handle with hose guides - High-efficiency SILCA leather piston assembly - Brass check-valve assembly - Long filler hose with integrated Schrader chuck - Push-on alloy Presta chuck with bleeder valve - Rated to 220psi

Pista Plus is a floor pump that's built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, combined with our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity. The smaller-diameter barrel matched with the superior pumping efficiency of our classic 28mm 731 model Italian leather piston gasket and self-lubricating linear bearings means that Pista Plus is capable of easily reaching pressures up to 220 PSI. Pista Plus features a three-footed aluminum base and a full-size lathe-turned ash handle. The chuck dock on Pista Plus secures the chuck at the Schrader chuck allowing the rider to swap the standard chuck out for our HIRO chuck or Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and features a high-contrast face design. - Durable, high-strength steel barrel - Full-size lathe-turned ash wood handle with hose guide - High-efficiency SILCA leather piston assembly - Brass air bridge and check-valve assembly - 2% Accurate, heavy-duty 2.5" (64mm) gauge rated to 220PSI - Integrated Schrader chuck plus press-on alloy Presta chuck with Bleeder valve

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning

Head Washer for 2371 Head

Bag of 3 replacement washers for EVA heads on all SKS floor pumps

Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves