Fenders

Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)

The ultimate clip-on mudguard set for road and cyclocross bikes for tire widths between 25 and 32mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Its superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Includes adhesive protection kit to avoid damaging the paintwork. Disc brake compatible: Please be mindful of the brake wire.

Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm

- Raceblade Long Hardware Kit, for 2nd bike, or to replace worn parts

- Lightweight minimalist fender uses a carbon fiber shaft, polycarbonate guard and forged alloy mount - Fender mounts to quick release, is easy to adjust and makes no noise - Special underside profile effectively disperses the worst of the water and dirt away from the rider - Accommodates up to 25mm tire

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus the hardware is pre-installed for quick mounting.

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.

Giant's Arc Fenders features a v-shape drainer that helps remove mud and water efficiently so you stay dry. They easily mount with a front and rear quick-release and, with the single-arm stay mount, they're a stylish addition to your bike. Plus, they're made from a super lightweight poly-carbonate material for long-lasting protection from nasty weather.

FUNCTIONAL. FASHIONABLE. FENDERS. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Original replacement fenders for Electra Townie bikes - Color matched for direct compatibility

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

- Comes with black hook and loop velcro for easy installation and removal. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

The Stingray mudguards supplement SKS's Bluemels range in the accustomed quality with modern colors in a matte design. First-grade plastic with an aluminum core for high-impact resistance. The stays feature quick-mounting fixed end caps. These fenders feature an elegant matte finish, edge protectors, and an automatic stay release safety system for the front. - Same features as the Commuter II fenders with the addition of colors and blacked out V-Stay - Fits tires 700 x 28-37mm - 45mm profile width

This sea gem shines on just about any color bike. - Comes with black hook and loop velcro for easy installation and removal. Instructions for installation can be found here. - Keeps your face clean and keeps you smiling longer. - Added wing protection keeps dirt/mud/dust/grime out of your fork seals and stanchions, increasing time between suspension services and extending the life of your fork. - Fits most mountain bike wheel size and fork combinations. Not compatible with reverse arch forks. - Flexible, lightweight and extremely durable polyethylene that's made in the USA from energy-conscious manufacturers using sustainable materials.

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

- Made of strong, durable polypropylene board with velcro attachement. - Keeps the rider and passenger clothes clean. - Helps to prevents passengers feet, hands and clothes from getting tangled in the wheel. - Includes both sides.

Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)

Fender set with flexible spoiler It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-around protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid, and protected against corrosion. New V adapter with ESC security system With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts. - Aluminum/plastic sandwich construction - With a flexible spoiler - V-adapter with ESC safety system - Stable double U-struts - Made in Germany

Keep your little rider dry and clean with SKS's Rowdy fenders. They're compatible with a wide variety of frame types and feature durable mounting brackets for worry-free use.

- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes

Keep water and mud off you with SKS's X-Blade II Rear Fender! The high-performance dual-compound plastic is ready for wet weather action, while two moveable joints allow for perfect placement and optimum coverage.

These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

The Cascadia ALX Fender Hardware Kits are compatible with Cascadia ALX fenders. Includes: - Rear fender metal clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Cascadia ALX Fenders: - 35mm Width: 700c x 35mm - 43mm Width: 700c x 43mm - 50mm Width: 700c x 50mm, 650B x 50mm, 26-inch x 50mm, 20-inch x 50mm - 60mm Width: 26-inch x 60mm, 650B x 60mm - 65mm Width: 29-inch x 65mm

Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. Details; - Fenders intended for warranty and service use. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility - Sold in pairs - Includes struts

This ultra long clip-on mudguard set for road bike tires (up to max. 25mm width) protects you, whether you’re riding your road bike in a warm summer rain or on solitary winter trips. The end of each mudguard extends to below the hub axles. This length ensures a full coverage, meaning you, and also the cyclist behind you, are spared from splashing. They can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. Once the metal mounting brackets are fitted to the bicycle, the mudguards can be clipped on and off in seconds making them ideal for use as needed. Brackets attach at brake bolts and skewers. - End of each fender extends to below the hub axles - Length ensures full coverage for the user and those riding in proximity - Can be adapted to the radius of the wheel by adjusting the length of the stays

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.