MTB Parts Catalog Link Section

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

- Lug pattern designed to give greater progressiveness, terrain versatility and maximum grip when braking - New 3x33 TPI casing with high-density fibers, lighter, more comfortable and robust, tailored to Enduro racing - Maximum durability with the new Gravity Shield casing, offering greater ride comfort - A tire co-developed with and validated by the world's best EWS riders - Rear-specific tread design

- Ideal for fitness and comfort cyclists - A great replacement handlebar

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees

- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair

- One-piece ABS resin body - Molded pins - 320g pair

- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair

- One-piece nylon body - Chromoly spindle - Toe clip compatible - 407g pair

The K40 is a reliable tire for recreational use. Its grooved tread provides traction on pavement. Kenda K40 Street tires are designed for a variety of paved road conditions while providing comfort at a economical price - Fits EA3/E3/650A Rims typically on English 3 Speed bikes

Giant's Comfort Cruiser Pedals are perfect for cruisers, townies and any other bike. They feature grippy rubber platforms, nylon bodies and steel axles for durability.

- Plastic nylon molded body - Chromoly spindle - 318g pair

- One-piece resin body - Chromoly spindle - Toe clip compatible - 366g pair

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

Sturdy steel construction with a versatile riser bar style.

Dimension City Pedals. - Built-in reflectors, will not accept toe clips - Molded nylon; 1-piece, caged-type pedal - Slip-resistant surface

Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g

- One-piece resin body - Barefoot friendly rubber surface - Includes reflectors

- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair

Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Chrome plated steel body and cage - Built in reflectors

- Nylon co-molded body with rubber tread surface - Reflectors included - 9/16"

The Thumper is a fast-rolling XC tire that handles predictably when things get loose. - Overlapping center knobs reduce rolling resistance - Durable 27 TPI casing

- Hybrid tire for street or light trail use - Wire bead - Size: 26 x 1 3/8 (ISO 590mm)

- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g

The Safari pedal is designed with extra pins in these high impact areas to ensure the pedal stays grippy after withstanding severe abuse. The optimal pin placement, hexagonal pin shape, and knurling all combine to make this one of the most durable, effective plastic pedals in the market. - Tough Nylon Fiberglass construction - True dual concave design - Knurled surface for extra grip - 20 hexagonal pins per side

Get back on the road with a replacement handlebar for your cruiser bike. Customize your bike with a new handlebar that fits your own personal style. PRODUCT DETAILS - Traditional 35 degree back sweep handlebar - 6061-T6 polished aluminum with anodize finish - RIDE+ versions have an integrated cable guide inside

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum